|ABOUT US||HOME||PRODUCTs||NEWS||CONTACT US|
|CALL US NOW AT: 1-877-789-7622 OR REACH US BY EMAIL AT: INFO@AMCFOAM.COM|
Toll Free: 1-877-789-7622
Heat-Sheet is a radiant floor heating system made of rigid foam insulation panels. For use in residential and commercial buildings, Heat-Sheet is designed to be incorporated into the floor system.
Heat-Sheet panels are made with high density expanded polystyrene (EPS) designed to support the weight of cast-in-place concrete, and foot traffic during construction. Type 2 or 3 expanded Polystyrene (EPS), per CAN\USL S701. and Type II or IX EPS, per ASTM C578.
The staggered nodules provide a simple and efficient system for tube installation, while ensuring a tight fit, and proper tube alignment. The nodules create a tube channel that accommodates multi-directional placement of 1/2", 5/8", or 3/4", I.D. tubing, with 3" on-center points.
Heat-Sheet is manufactured in 2ft x 4ft panels with interlocking edges to ensure a stable fit between panel joints. Panels are available in a variety of thicknesses.
Heat-Sheet can be used under concrete slabs where radiant floor heating is required such as slab-on-grade, sandwich slab construction, and snow melt systems. In addition, Heat-sheet can be used in retrofit and overlay application.
Heat-Sheet products have a minimum compression strength of 20 psi. (Higher compression strengths are available upon request.)